Business Operation · 2025
In this section22 topics
- Corporate Information4 items
- Dividend Policy2 items
- Major Shareholders1 item
- Business Strategies Overview5 items
- Material Changes & Developments1 item
- Use of Proceeds from Securities Offerings1 item
- Commitments Made in the Registration Statement1 item
- Group Operating-Structure Policy1 item
- Companies Where the Company Holds ≥10%1 item
- Shareholders with Potential Conflict of Interest1 item
- Relationships Among Major Shareholders1 item
- Shareholders' Agreement1 item
- Shareholding Diagram (Group Structure)2 items
- Income Structure3 items
- Product / Service Characteristics2 items
- Research & Development6 items
- Assets Used in the Business5 items
- Marketing Policy & Competition3 items
- Procurement of Products & Services9 items
- Projects Under Construction1 item
- Debentures & Bills of Exchange1 item
- Convertible Securities1 item
Corporate Information
Company Name
ASIAN INSULATORS PUBLIC COMPANY LIMITED
Telephone
0-2517-1451, 0-2517-1026, 0-2517-9447-8
Website
http://www.asianinsulators.com
asian@asianinsulators.com
Dividend Policy
Dividend Policy
The company has a policy of paying dividends to shareholders each year of not less than 40% of net profit after deducting all types of reserves as required by law. However, such dividend payments will be subject to future investment plans, needs, and other appropriate considerations. Resolutions by the Board of Directors approving dividend payments must be submitted to the shareholders' meeting for approval, except for interim dividends, where the Board of Directors has the authority to approve the payment and then report it to the shareholders' meeting at the next meeting. The company must also set aside legal reserves of at least 5% of net profit until the amount of the reserve equals 10% of the company's registered capital. The company does not prescribe a dividend payment ratio for subsidiaries. Dividend payments by subsidiaries depend on the performance of each subsidiary. Dividend payments from subsidiaries to the company are subject to the regulations of each company and must be approved by shareholders at the annual general meeting. Interim dividends can be paid. For a subsidiary to pay dividends, it must be profitable from its business operations. If the company incurs losses, no dividend will be paid until the losses turn into profits. The subsidiary must also set aside legal reserves of at least 5% of net profit until the amount of the reserve equals 10% of the subsidiary's registered capital.
Historical Dividend Payments
| This Year | Last Year | 2 Years Ago | 3 Years Ago | 4 Years Ago | Metric | Description |
|---|---|---|---|---|---|---|
| 0.09 | 0.55 | 0.17 | 0.18 | 0.63 | Net profit per share (Baht : Share) | Net profit per share (baht : share) |
| 0.29 | 0.25 | 0.3 | 0.67 | 0.22 | Dividend per share (Baht : Share) | Dividend per share (baht : share) |
| 0 | 0 | 0 | 0 | 0 | Dividend stock ratio (Number of original shares: dividend shares) | Ratio of stock dividend payment (existing share : stock dividend) |
| 0 | 0 | 0 | 0 | 0 | Dividend share value per share (Baht : Share) | Value of stock dividend per share (baht : share) |
| 0.29 | 0.25 | 0.3 | 0.67 | 0.22 | Total dividend payment value (Baht : Share) | Total dividend payment (baht : share) |
| 311.83 | 45.45 | 175.44 | 368.13 | 34.7 | Dividend payout ratio to net profit (%) | Dividend payout ratio compared to net profit (%) |
Business Strategies Overview
Chairman's Message
For the year 2025, the company and its subsidiaries reported sales revenue of 8,171.88 million baht, a decrease of 10.83%. Profit before income tax was 89.41 million baht, a decrease of 83.57%. Net profit for the year was 74.32 baht, a decrease of 84.70%. Earnings per share were 0.093 baht. The performance resulted from operations in the electrical insulator business, construction contracting, and renewable energy and vegetable oil businesses. I, the Chairman of the Board of Directors of Asian Insulator Public Company Limited, manage the business under the principles of good corporate governance, committed to conducting business ethically, and improving quality of life and the environment. I would like to thank our shareholders, customers, business partners, the government sector, financial institutions, and employees for their continued trust and support of the company.
Mr. NarongThareratanavibool
Chairman
Vision
Asian Insulator Public Company Limited is committed to being a leader in the development and production of high-quality insulation products that enhance sustainability in the construction and energy protection industries. We aim to offer products with the highest energy efficiency, meeting the needs of both domestic and international markets through continuous innovation, research, and development.
Objectives
Objectives of Asian Insulator Group Public Company Limited:
1. Manufacturing and distribution of high-quality ceramic electrical insulation products. 2. Research and development of new products: The company focuses on research and development of new technologies and innovations to create high-performance products that fully meet market demands and ensure sustainable use.
3. Market expansion both domestically and internationally: To expand the customer base and market segments by developing diverse distribution channels, both domestically and internationally.
4. Sustainability and social responsibility: The company is committed to conducting business with sustainability and social responsibility in mind, efficient resource utilization, and supporting activities that promote community well-being. Customer satisfaction is prioritized through high-quality service and excellent after-sales care to build long-term relationships with customers. Send feedback
Goals
Goals of Asian Insulator Public Company Limited: 1. Developing high-quality products that meet the needs of customers across all industry sectors. 2. Increasing production efficiency and reducing costs. The company aims to increase production efficiency through the use of modern technology and continuous improvement of production processes to reduce production costs and increase net profit. 3. Developing and promoting new innovations. The company aims to be an innovative organization by investing in research and development (R&D) to create new products that better meet customer needs and help save energy. 4. Strengthening business sustainability. This involves considering environmental protection, efficient resource utilization, and financial stability for the benefit of shareholders and the community. Send feedback
Business Strategies
Operational Strategies of Asian Insulator Public Company Limited
1. Enhancing Production Efficiency The company prioritizes improving production efficiency to reduce costs and increase productivity. This includes utilizing modern technology and machinery in the production process to achieve high-quality products that are competitive in the market.
2. Strengthening Customer Relationships The company focuses on maximizing customer satisfaction through quality service, excellent after-sales service, and building lasting relationships to retain existing customers and expand its customer base. Send feedback
Material Changes & Developments
Material Changes & Developments
| Year | Description |
|---|---|
| 2,022 | On April 5, 2022, the Company's Annual General Meeting (E-AGM) for 2022, held electronically, resolved to approve the payment of dividends for the 2021 fiscal year at a rate of 0.70 baht per share, totaling approximately 490 million baht. This represents a dividend payout ratio of 94.05% of retained earnings for 2021, as detailed in the separate financial statements: - The Company has already paid an interim dividend for the first half of the year at a rate of 0.07 baht per share, totaling 196 million baht, on September 7, 2021, for 2,800,000,000 shares with a par value of 0.25 baht per share. (On October 11, 2021, the Company changed the par value from 0.25 baht to 1.00 baht. Therefore, if calculated at a par value of 1.00 baht, the dividend payment would be 0.28 baht per share.) And - The Company will pay the final dividend installment. On April 29, 2022, the company approved an interim dividend payment of 0.42 baht per share, totaling 293.99 million baht, on 699,999,021 shares with a par value of 1.00 baht per share. This dividend was paid from the company's unallocated retained earnings from the separate financial statements. Individual shareholders will be subject to a 10% withholding tax, and can claim a dividend tax credit at a rate of 20/80. On August 11, 2022, the Board of Directors approved an interim dividend payment from the unallocated retained earnings for the six-month period from January 1, 2022, to June 30, 2022, for the separate financial statements, at a rate of 0.25 baht per share, representing a dividend yield of 76.19%, totaling 175 million baht. The interim dividend was scheduled for payment on September 9, 2022. Individual shareholders will be subject to a 10% withholding tax. And you can claim a dividend tax credit at a rate of 20/80. |
| 2,023 | On April 5, 2023, the Company's Electronic Annual General Meeting (E-AGM) for 2023 resolved to approve the payment of dividends for the 2022 fiscal year at a rate of 0.45 baht per share, totaling approximately 315 million baht. This represents a dividend payout ratio of 89.49% of retained earnings for 2022, as detailed in the separate financial statements: - The Company has already paid an interim dividend for the first half of the year at a rate of 0.25 baht per share, totaling 175 million baht, on September 9, 2022, for 699,999,021 shares. And - The Company will pay the final dividend at a rate of 0.20 baht per share, totaling 140.00 million baht, on May 3, 2023, for 699,999,021 shares, payable from the unallocated retained earnings of the business, as detailed in the separate financial statements. Individual shareholders will be subject to a 10% withholding tax on their income. They are eligible for a dividend tax credit at a rate of 20/80. On August 11, 2023, the Board of Directors approved the payment of an interim dividend from unallocated retained earnings for the six-month period from January 1, 2023, to June 30, 2023, for the separate financial statements, to shareholders at a rate of 0.10 baht per share, representing a dividend yield of 78.53%, totaling approximately 70 million baht. The interim dividend is scheduled for payment on September 8, 2023. Individual shareholders will be subject to a 10% withholding tax and are eligible for a dividend tax credit at a rate of 20/80. On August 17, 2023, the Board of Directors meeting No. 4/2023 approved the establishment of a subsidiary company, AI Marketing Co., Ltd., to sell, wholesale, and retail high and low voltage electrical insulators and related accessories. With a registered capital of 1.00 million baht. |
| 2,024 | On April 4, 2025, the Company's Electronic Annual General Meeting (E-AGM) for 2025 resolved to approve the payment of dividends for the 2024 fiscal year at a rate of 0.34 baht per share, totaling approximately 238 million baht, representing a dividend payout ratio of 87.68% of retained earnings for 2024, as detailed in the separate financial statements: - The Company has already paid an interim dividend for the first half of the year at a rate of 0.15 baht per share, totaling 105 million baht, on September 6, 2024, for 699,999,021 shares. And - The Company will pay the final dividend at a rate of 0.19 baht per share, totaling 133 million baht, on April 25, 2025, for 699,999,021 shares, payable from the unallocated retained earnings of the business as detailed in the separate financial statements. Individual shareholders will be subject to a 10% withholding tax on their income, and are eligible for a dividend tax credit at a rate of 20/80. On August 9, 2024, the company's board of directors approved the payment of an interim dividend from unallocated retained earnings for the six-month period from January 1, 2024, to June 30, 2024, for the separate financial statements, at a rate of 0.15 baht per share, representing a dividend yield of 97.65%, totaling approximately 105 million baht. The interim dividend is scheduled for payment on September 6, 2024. Individual shareholders will be subject to a 10% withholding tax and are eligible for a dividend tax credit at a rate of 20/80. |
| 2,025 | On February 18, 2026, the Board of Directors set the date for the 2026 Annual General Meeting of Shareholders on April 8, 2026, at 1:30 PM, and proposed that the meeting consider and approve the payment of the 2025 annual dividend at a rate of 0.20 baht per share, totaling approximately 140 million baht. This represents a dividend payout ratio of 48.88% of retained earnings for 2025, as per the separate financial statements. Details are as follows: - The Company has already paid an interim dividend for the first half of the year at a rate of 0.10 baht per share, totaling 70 million baht, on December 11, 2025, for 699,999,021 shares. And - The Company will pay the final dividend at a rate of 0.10 baht per share, totaling 70 million baht, on April 28, 2026, for 699,999,021 shares. This will be paid from the unallocated retained earnings of the business as per the separate financial statements. Individual shareholders will be subject to a 10% withholding tax, and they are eligible to claim a dividend tax credit. Dividends can be claimed at a rate of 20/80. On November 12, 2025, the Board of Directors approved the payment of an interim dividend from unallocated retained earnings for the nine-month period from January 1, 2025, to September 30, 2025, at a rate of 0.10 baht per share, totaling 70,000,000.00 baht, representing 23.92% of the retained earnings from the separate financial statements. This is in line with the company's dividend policy. Individual shareholders will be subject to a 10% withholding tax and can claim a dividend tax credit at a rate of 20/80. The interim dividend payment date is set for December 11, 2025. Director Appointments and Resignations
|
Use of Proceeds from Securities Offerings
Is There Money Raised from a Securities Offering Still to Report On?
No
Commitments Made in the Registration Statement
Are There Commitments or Conditions from an Offering or Listing?
No
Group Operating-Structure Policy
Description
Asian Insulator Public Company Limited (AI) was established on May 12, 1981, with the primary objective of manufacturing and selling electrical insulators for use in the power and energy sectors. Currently, the company's factory is located in Phrom Buri District, Sing Buri Province, with a production capacity of 6,000 tons per year. As of October 31, 2018, the company had registered and paid-up capital of 700 million baht, divided into 700 million ordinary shares with a par value of 1.00 baht per share. The company has investments in the manufacturing and selling of electrical insulators, engineering business, and the production and sale of vegetable oil and renewable energy (biodiesel).
Companies Where the Company Holds ≥10%
Companies (≥10% Holding)
| Company Name | Address | Province | Zip Code | Telephone | Fax | Business Type | Security Type | Shares | Paid-up Shares |
|---|---|---|---|---|---|---|---|---|---|
| AI Energy Public Company Limited | 55/2 Moo 8 Sethakit 1 Rd., Klong Maduea, Krathum Baen | Samut Sakhon | 74110 | 0-3487-7485-8 | 0-3487-7491-2 | The manufacturer and distributor of biodiesel, edible oil, refined glycerine and by products from crude palm oil | Common shares | 1,384,014,009 | 1,384,014,009 |
| AI Engineering Services Company Limited | 254, SERI THAI ROAD, KHAN NA YAO | Bangkok | 10230 | 02-5171451 | 02-5171465 | Construction and installation business for substations and high-voltage power transmission lines | Common shares | 20,000,000 | 20,000,000 |
| Asian Insulators Marketing Company Limited | 254, SERI THAI ROAD, KHAN NA YAO | Bangkok | 10230 | 02-5171451 | 02-5171465 | Distributor of porcelain insulators products for electricity distribution | Common shares | 100,000 | 100,000 |
| AI Marketing 2566 Company Limited | 254, SERI THAI ROAD, KHAN NA YAO | Bangkok | 10230 | 02-5171451 | 02-5171465 | Distributor of porcelain insulators products for electricity distribution | Common shares | 100,000 | 100,000 |
| AI Marketing 2023 Company Limited | 254, SERI THAI ROAD, KHAN NA YAO | Bangkok | 10230 | 02-5171451 | 02-5171465 | Distributor of porcelain insulators products for electricity distribution | Common shares | 100,000 | 100,000 |
| AI Marketing Company Limited | 254, SERI THAI ROAD, KHAN NA YAO | Bangkok | 10230 | 02-5171451 | 02-5171465 | Distributor of porcelain insulators products for electricity distribution | Common shares | 100,000 | 100,000 |
Income Structure
Product / Service Income
| Category | Description | This Year | This Year % | Last Year | Last Year % | 2 Years Ago | 2 Years Ago % |
|---|---|---|---|---|---|---|---|
| Total revenue from operations | Total revenue from operations | 8,171,888 | 100 | 9,163,948 | 100 | 8,762,162 | 100 |
| Porcelain insulators and component | 356,642 | 4.36 | 794,534 | 8.67 | 458,446 | 5.23 | |
| Construction contract | 156,122 | 1.91 | 113,821 | 1.24 | 68,475 | 0.78 | |
| Palm oil | 7,642,288 | 93.52 | 8,238,904 | 89.91 | 8,221,113 | 93.83 | |
| Other | Others | 16,836 | 0.21 | 16,689 | 0.18 | 14,128 | 0.16 |
Export Income
| Category | Description | This Year | This Year % | Last Year | Last Year % | 2 Years Ago | 2 Years Ago % |
|---|---|---|---|---|---|---|---|
| Total revenue | Total revenue | 8,171,888 | 100 | 9,163,948 | 100 | 8,762,162 | 100 |
| Domestic | Domestic | 8,091,316 | 99.01 | 9,090,237 | 99.2 | 8,612,814 | 98.3 |
| International | International | 63,737 | 0.78 | 73,711 | 0.8 | 149,348 | 1.7 |
Other Income
| Operating Other Income | Non-Operating Other Income | Share of Profit |
|---|---|---|
| 1710 · As of year: 16836.0 · Description: Total other income · As of yesteryear: 16689.0 · As of year before yesteryear: 14128.0 · 1711 · As of year: 6720.0 · Description: Other income from operations · As of yesteryear: 7743.0 · As of year before yesteryear: 10025.0 | 1712 · As of year: 10116.0 · Description: Other income not from operations · As of yesteryear: 8946.0 · As of year before yesteryear: 4103.0 | 1713 · As of year: 0.0 · Description: Share of profit · As of yesteryear: 0.0 · As of year before yesteryear: 0.0 |
Product / Service Characteristics
Business Type
3114
Business Groups
| Business Group | Description |
|---|---|
| Porcelain Insulator | 1.2.2.1 Product Characteristics Electrical insulators are a crucial component of overhead power distribution systems, including both high-voltage transmission lines and distribution lines. This is because insulators act as insulators, preventing the flow of current through utility poles to the ground. If this happens, protective devices installed in the distribution system will disconnect the circuit, disrupting the power supply and causing widespread blackouts. Generally, electrical insulators are shaped like rods or cylindrical cups with fins or grooves for the wires to pass through. They are made from insulating materials such as glass, porcelain, and polymers. However, porcelain insulators are currently the most popular and widely used in all countries worldwide due to their excellent insulating properties, ability to meet standards, durability, and reasonable price. Glass insulators were popular from around 1847 onwards because they were cheaper than porcelain. However, around 1877, glass insulators declined in popularity because they could not support larger and heavier power transmission lines. Porcelain insulators gradually gained popularity. Furthermore, their quality was continuously improved over time. By the 1910s, many countries, such as the United States, had completely replaced glass insulators with porcelain insulators for both low and high voltage transmissions. While polymer materials were developed as replacements, they were not widely popular due to their lower durability and decreased insulation properties at high temperatures. Generally, insulators have a lifespan of approximately 15-20 years, depending on the type and operating environment. Manufacturing insulators requires technologies in materials science, electrical engineering, and metallurgy to produce insulators that meet various standards such as the American National Standard Institute (ANSI), the International Electrotechnical Commission (IEC), the Australian Standard (AS), and/or the Thai Industrial Standard (TIS). Therefore, the company prioritizes quality control at every stage of production, including physical and chemical control of raw materials, and quality inspection of finished products in its own testing labs and leading testing facilities domestically and internationally. A good insulator, when installed and in use, can withstand various voltage levels in power transmission and distribution systems. They can withstand mechanical stress from wind currents, temperature changes, as well as the weight of electrical wires and equipment in various electrical systems, and maintain unchanged insulation properties. The electrical insulators manufactured and sold by the company can be divided into 12 types based on their shape and current carrying capacity, as follows: Types of Electrical Insulators Applications of Porcelain Suspension Insulators: 1. Used to secure electrical wires in distribution and transmission systems with voltages of 22 – 33 kV: Pin-type insulators. 2. Used to support electrical wires in distribution systems with voltages of 22 – 33 kV: Pin-post type insulators. 3. Used to support electrical wires in distribution systems with voltages of 22 – 115 kV: Line-post type insulators. 4. Used to support electrical wires in distribution systems with voltages of 22 – 33 kV: Alumina Ceramic Cable Spacers. 5. Used as separators and holders for electrical wires in distribution systems with voltages of 22 – 115 kV: Station Post Type Insulators for voltage switching stations. 6. Used to secure and attach to steel supports for electrical cables before they reach transformers in substations and for optic fiber cables (Cleat Insulators). 7. Used as bracing for electrical poles in 22-33 kV power distribution systems; insulation for pole mounting devices; strain insulators. 8. Used as insulation for electrical cable clamps. Underground Cable Support Insulators 9. Used to support low-voltage cables (Spool Insulators) 10. Used as a cable clamp in 220-380 volt distribution systems. Fuse Cut Out Insulators 11. Line Post Insulators 69 & 115 kV, used to support 69 and 115 kV cables (Horizontal Mounting 69 & 115 kV) Used in 69 and 115 kV power transmission systems. |
Research & Development
Has R&D Policy (Y/N)
Yes
R&D Cost — Description
The company focuses on research and development (R&D) to improve efficiency and innovate in the production of high-quality electrical insulators. Overall, R&D expenses represent a significant investment for the company in developing new, high-quality products that meet long-term market demands. This will enable the company to maintain its market competitiveness and foster future growth. The expenses are as follows:
1. Labor Costs
2. Depreciation of Equipment
3. Sample Testing Costs
R&D Cost — Label
Research and development (R&D) expenses over the past 3 years (Million Baht)
R&D Cost — This Year
5.8
R&D Cost — Last Year
7.39
R&D Cost — 2 Years Ago
7.41
Assets Used in the Business
Permanent Assets — Description
Assets that the Company holds and uses in its business operations, which are essentially non-resale assets with a useful life of more than one year. These assets are used in the production of goods or services and can generate income for the Company in the long term.
Permanent Assets — Appraisal
| Asset | Ownership | Obligation | Appraisal Value | Description |
|---|---|---|---|---|
| Land and Land improvement | The company and its subsidiaries | No | 463.54 | - |
| Building and port | The company and its subsidiaries | No. | 296.23 | - |
| Utility systems | The company and its subsidiaries | No. | 77.8 | - |
| Machinery and Factory equipment | The company and its subsidiaries | No. | 694.46 | - |
| Office equipment | The company and its subsidiaries | No. | 4.89 | - |
| Vehicles | The company and its subsidiaries | No. | 18.59 | - |
| Construction in progress Asset under installation | The company and its subsidiaries | No. | 63.68 | - |
Intangible Assets — Description
The Company and its subsidiaries have intangible assets of 3.65 million baht, including computer programs for the office and production control systems, which are intangible assets in the Company's ownership, consisting of ready-made software of 2.52 million baht and the right to use the natural gas distribution system of 1.13 million baht.
Has Subsidiaries Investment Policy (Y/N)
Yes
Subsidiaries Investment Policy — Description
The Company manages its subsidiaries in accordance with the structure of the Group of Companies. The Board of Directors has set the principles for supervising the operations of subsidiaries in order to maintain the benefits of the Company's investments, as follows:
• The Board of Directors will consider and approve the sending of a representative of the Company to be a director of each subsidiary to supervise the subsidiaries to operate in accordance with the law, good corporate governance policy, and other policies of the Company.
• The Company must receive quarterly performance reports and submit supporting documents for consideration, and the subsidiaries must strictly comply with them.
• If a subsidiary makes any report or takes any action that falls under or constitutes an acquisition or disposal of assets in accordance with the announcement of the Capital Market Supervisory Board on the acquisition or disposal of assets, or a related transaction in accordance with the announcement of the Capital Market Supervisory Board on related transactions, which will result in the Company having the duty to request approval from the Board of Directors' meeting and/or disclose information to the Stock Exchange of Thailand and/or request approval from the shareholders' meeting of the Company before entering into the transaction in accordance with the specified criteria. However, the subsidiary will enter into the transaction or proceed only after receiving approval in accordance with the specified criteria. In addition, if the subsidiary enters into the transaction or certain events occur, which cause the Company to have the duty to disclose information to the Stock Exchange of Thailand in accordance with the specified criteria, Directors of subsidiaries are required to immediately notify the Company’s Managing Director that the subsidiary plans to enter into a transaction or such an event occurs.
• The Company has a policy requiring directors of subsidiaries to disclose information on their interests and those of related persons to the Board of Directors regarding their relationships and transactions with the Company in a manner that may cause conflicts of interest by the Board of Directors of the subsidiaries to the Board of Directors of the Company. Directors of subsidiaries must not participate in approving matters in which they have an interest or a conflict of interest, either directly or indirectly. In the event that the Company finds any material suspicious issues, they may notify the subsidiary to clarify and submit documents for consideration.
Marketing Policy & Competition
Reporting Mode
3117
Marketing Policy (Overall)
The company's primary customers are the Provincial Electricity Authority (PEA) and the Metropolitan Electricity Authority (MEA), while secondary target customers include contractors who undertake pole installation and cable laying work for PEA and MEA. The electrical insulator industry is a related industry to the electrical industry, as electrical insulators are products used in electricity transmission and distribution systems. Changes in the demand and supply of electricity inevitably affect the electrical insulator industry. The current structure of the electricity business begins with power plants, often located far from communities, generating electricity. This generated power is then transmitted through high-voltage transmission lines to areas with electricity demand, such as communities or industrial estates. From there, the voltage is reduced, and the electricity is distributed through low-voltage distribution systems to end-users. Considering the activities involved in supplying electricity to consumers in this manner, we can divide the electricity business structure into three main systems:
Generation system,
Transmission system
The distribution system, in order, currently comprises most electricity generation systems
The electricity distribution and service system is under the supervision of the Provincial Electricity Authority (PEA) and the Metropolitan Electricity Authority (MEA). The Electricity Generating Authority of Thailand (EGAT) produces and transmits almost all of its electricity, selling it to PEA and MEA for distribution to consumers. MEA is responsible for distributing electricity to users in Bangkok, Nonthaburi, and Samut Prakan, while PEA is responsible for the remaining provinces, covering approximately 510,000 square kilometers, or 99% of the country's total area. Currently, the national transmission system is insufficient, and PEA is expanding its high-voltage transmission lines. Each expansion requires the use of electrical insulators, mostly those capable of withstanding high voltages. Therefore, it can be concluded that the electrical insulator industry market in Thailand is primarily dependent on the demand from the national electricity distribution system, which is under the supervision of EGAT, PEA, and MEA. The remaining small market share belongs to contractors, some of whom undertake pole installation, line laying, and infrastructure development for large communities such as housing estates and industrial estates. Another segment consists of contractors who undertake pole installation and power line laying work for the Electricity Generating Authority of Thailand (EGAT), the Metropolitan Electricity Authority (MEA), and the Provincial Electricity Authority (PEA). The size of the electrical insulator market and current industry growth trends: The Thai electrical insulator market is approximately 2.6 billion baht, or 7-10% of the annual budget for upgrading and developing the electricity system of the PEA and MEA. The industry's growth depends on key factors such as the expansion of the PEA and MEA's electricity systems to ensure stability, sufficiency, and reliability to meet increasing peak electricity demand, and to have a network covering households nationwide. As for the growth trend of the electrical insulator industry, it is expected to expand further in line with the increasing national electricity demand and the growing number of households, driven by the continuously expanding economy.
Future peak electricity demand trends and forecasting are the direct responsibility of the Sub-Committee on Electricity Demand Forecasting. This sub-committee comprises representatives from the three electricity authorities, relevant government agencies including the Department of Energy Development and Promotion, the National Economic and Social Development Council, the National Statistical Office, and the National Energy Policy Council, as well as private power producers and electricity users such as representatives from the Federation of Thai Industries and the Thai Chamber of Commerce, and experts. A representative from the National Energy Policy Council serves as the secretariat. Electricity demand forecasting figures are crucial for national electricity planning and policy formulation. These figures enable the Electricity Generating Authority of Thailand (EGAT), the Metropolitan Electricity Authority (MEA), and the Provincial Electricity Authority (PEA) to plan the expansion of electricity generation capacity, transmission systems, and distribution systems to adequately meet future electricity demand.
Industry & Competition (Overall)
Currently, there are Porcelain electrical curtain products. Which has set up 7 standard industrial products, consisting of 21 products as follows
1. TIS. 227-2525. D-porcelain.
2. TIS. 279-2525, straight stalks: Porcelain, which the product can be divided into 3 forms.
3. TIS. 280-2529. A chocolate kick: Porcelain, which the product can be divided into 4 forms.
4. TIS. 354-2528 Hanging Cups: Porcelain, which the product can be divided into 5 forms.
5. TIS. 1251-2537, straight rod: Porcelain, which is divided into 3 forms.
6. TIS. 1077-2535 Bags: Porcelain, which the product can be divided into 3 forms.
7. TIS. 2762-2016. Digital cord. Electrical cable: Ceramic coating with polymers. Currently, there are 7 -product of electrical monitor production that has been licensed to use the standard of the above industrial products. The company has a product format that is allowed to use the highest industrial product standard mark. There are 21 forms. In addition to the company having a form of products that are allowed to use the most industrial product standards. The company's products are also well accepted by target customers.
Procurement of Products & Services
Introduction
Currently, the company has a factory for the production of 1 electrical curtains located at 99 Asia Km 71-72 Road, Ban Mo Subdistrict, Phrom Buri District, Sing Buri Province. The company requires a period of machinery to improve the efficiency of production and maintenance for about 2 weeks per year.
Reporting Mode
3117
Procurement (Overall)
The main raw materials used in the production of electrical curtains include soil, raw materials used in soil. Hardware and fuel gas materials In which the company has regulations in the arrangement of those raw materials By requiring the company's employees to inspect the seller at the specified period (Supplier Assessment) once a year to ensure that the seller or distributor still maintains the quality of products and services. And have enough production capacity According to the company always wants. The company has the methods of procuring the following main raw materials.
Raw Material Acquisition (Overall)
The company has the following methods for sourcing its main raw materials: Clay is a raw material that can be sourced entirely domestically by ordering from clay mining operators who are distributed in various soil sources in the country. For the Mae Tan type of soil, it can be sourced from sources in Lampang and Ranong provinces. As for plastic clay and ball clay, it can be sourced from sources in Surat Thani and Nakhon Si Thammarat provinces. However, there is still a large amount of clay reserves that can be used to produce electrical insulators in each source. Raw materials used in mixing clay include alumina oxide, feldspar, China stone, Kaolin, Silica sand and Talcum, which are raw materials used in mixing clay to give the clay adhesion and strength. They are available in many provinces of the country, such as feldspar from Tak and Ratchaburi provinces, kaolin from Ranong province and talcum from Lampang province. Some of these raw materials can be sourced domestically. However, there are some raw materials that need to be imported from abroad because they are minerals that do not exist in Thailand, such as alumina oxide. Therefore, it must be imported from Japan, Australia and France. Hardware includes materials used as metal components of electric insulators, such as insulator fasteners, insulator head and tail caps, etc. The company orders components from both domestic and international sources. The company will contact manufacturers directly, such as foundry or stamped steel factories. Such manufacturers must understand the requirements for various properties of electric insulators in order to prevent production errors that would affect the properties of electric insulators. Natural gas (Natural Gas) To be used as heating fuel for electric insulator kilns, the company can obtain it from domestic distributors. The distributors have connected pipes to deliver natural gas (Natural Gas) to the company. There is a natural gas purchase and sale contract. Renewable energy and the company has installed a Solar Roof on the factory roof to generate electricity for use in manufacturing. It produces approximately 863.1 kilowatts of electricity, which can save 25% on electricity costs per year.
Production Policy (Overall)
Asian Insulator Public Company Limited has a production capacity of 6,000 tons per year.
Distributors (Overall)
NO
Number of Raw-Material Distributors (Overall)
5
Production Capacity (Overall)
| Item | Unit | Used | Capacity |
|---|---|---|---|
| Asian Insulators Public Company Limited | Ton | 80 | 6,000 |
Domestic/Overseas Purchase Proportion (Overall)
| Raw Material | Source Country | Value |
|---|---|---|
| ALUMINA | France | 36,584,500 |
| POTASSIUM FELDSPAR | Thailand | 2,011,200 |
| Kaolin clay | Thailand | 2,166,329 |
| Maethan clay | Thailand | 3,374,367 |
| Hardware | China | 22,359,095 |
Projects Under Construction
Has Projects Under Construction (Y/N)
No
Debentures & Bills of Exchange
Has Debentures (Y/N)
No
Convertible Securities
Has Convertible Securities (Y/N)
No
